Cartec BDE 3504 N SC - Thiết bị kiểm tra phanh xe tải

Part No: BDE 3504 N SC
Xuất xứ: Cartec - Germany
Giá: Liên hệ
Lượt xem: 166

Đánh giá

  • Đặc tính sản phẩm
  • Catalog
  • Điểm nổi bật
Cartec BDE 3504 N SC - Thiết bị kiểm tra phanh xe tải
Part. No Cartec BDE 3504 N SC
Xuất xứ: Cartec - Germany
 
Key Features
Analogue display, double scale: indicating range 0-6 / 0-30 kN
Two-part galvanised roller set
Rollers with expanded metal mesh and wear-proof plastic coating or alternatively in SmoothGrip design
Rear rollers elevated by 30 mm
Splash-proof motors
Rust-proof feeler rolls
Measurement with wear-free strain-gauge type load cells
Electric automatic drive-off aid
Automatic test sequence
Interface for printer / PC
Determination of braking force, braking force imbalance, rolling friction, ovality
Automatic switching in and re-start
Automatic or manual modes
Cut-out at wheel lock
Permanent determination of braking force imbalance
Automatic zero adjustment
Error check routine
Automatic switching over between cars and trucks
 
Technical Features
Brake tester/Test lane Max. drive-over load (t) 13
Brake tester Roller coefficient dry / wet > 0.7 - > 0.6
Brake tester Temperature range (°C) 0 - 40
Brake tester Idling speed (km/h) 2.5 / 5.0
Brake tester Roller diameter (mm) 204
Brake tester Roller length (mm) 1000
Brake tester Roller elevation (mm) 30
Brake tester Length (mm) 2 x 700
Brake tester Width (mm) 2 x 1225
Brake tester Height (mm) 2 x 550
Brake tester Weight (kg) 2 x 400
Brake tester Power supply (V/Hz) 400 / 50
Brake tester Supply lead (mm²) 5 x 10
Brake tester Fuse rating, slow-blow (A slow-blow) 3 x 50
Brake tester Motor power (kW) 2 x 9.2
Display cabinet Measuring range (kN) 0 - 6 / 0 - 30
Display cabinet Width (mm) 800
Display cabinet Depth (mm) 200
Display cabinet Height (mm) 600
Display cabinet Weight (kg) 35
 
Options
Kit 4WD mode
Side-slip tester SSP 4000
Wheel / axle load weighing unit
Safety device for pit installation (mandatory for use in Germany)
Key-operated main switch, attached externally
Roller cover plates, traversable - plug-in type
Built-in frame to facilitate preparation of foundation
Pedal force measuring system
Pressure transducers
Infrared remote control
Column or swivel wall bracket for display cabinet
2-digit LED for braking force imbalance 0-99%
8-digit LED for axle load, side-slip, pedal force
PC upgrade
SP Software (TAK version)
Tacho Control
 
Versions
With brake motors
With one or two test speeds
With plastic-coated rollers 1300 mm long
Version with level rollers, dual direction testing and 4WD mode
BDE 3504 N SC PC 13 t with control unit integrated in separate control cabinet (E box)
BDE 3504 N 13 t with display cabinet COMBI and separate power cabinet

 

Nguồn:
Website:  

http://thietbiotoviet.com/


Thiết bị ô tô Việt (TEV)
Social & Map
 Bản đồ hướng dẫn đường đi

Copyright  2014 - 2017 © thietbiotoviet.com All Rights Reserved!